Advertisement
When the monitor has detected the change of the signal input condition, the
monitor will indicate the condition automatically, as follows.
Precision frequency,
Horizontal *ZkHz approx.
Vertical +2Hz approx.
The EasyMenu indicates
orange.
This monitor meets the E
Management Signaling) standard and NUTEK specifications.
a built-in power management system that automatically reduces power
consumption when the PC is not in use.
effective only when used with VESA DPMS compliant PC or Video Card.
APM State Signal Requirement Monitor Action
Standby
Suspend
H.Sync. OFF and
Off
NOTE
Once the monitor receives the first signal from the PC and initiate the power
:
management system.
This monitor complies
system with computer, peripherals (including monitors), and operating system.
It works when the monitor is connected to DDC ready computer that is running
an operating system software that is capable for the plug & play.
S
*, VESA DPMS (Display Power
NERGY
TAR
This power management system is
Switches to
saving mode &
screen darkens
with VESA DDC 1/2B specifications.
The monitor det
sync. signal which is out
of specification, or
mode. Refer to "POWER
MANAGEMENT
SYSTEM" below.
The monitor has
Power Consumption Power LED
15W max.
15W max.
5W max.
Plug & Play is a
Orange
Orange
Orange
13
Advertisement
