Advertisement
install the monitor in the following way,
FRONT VIEW
Front Cover
CRT Surface
Power Switch
1. Installation
Install the monitor on a horizontal base.
2. Power Cord Connection
country in which you are using the monitor.
3. Signal Cable Connection
Insert the Signal Input Connector of the monitor to the host computer, with
attention to its suitability, and secure the screws on the connector shell firmly.
D-Sub Mini 15pin Connector
4. Power On
Turn on the Power Switch of the monitor first, then the computer.
Refer to Page IO "POWER ON/OFF".
taking care to maintain safety.
REAR VIEW
AC Inlet
Power Cord,
Advertisement
