Advertisement
Adjust
Function
Save
Switches Switches
Switch
POWER ON/OFF
Press the Power switch, to switch the power ON or OFF.
n
When power is ON, the power LED lights.
monitor.
Otherwise the monitor may operate incorrectly.
following and wait at least 30 seconds before restarting the monitor.
Make sure the power switch of the computer, power cord connection, signal
cable connection
CONTROL
shows the selected function, its condition, the function menu and the input
signal frequencies.
Use the function "LANGUAGE SELECT". /
switches.
n
You can save the your geometry and
colour settings.
seconds.
SAVE
Press the Save switch, to save your all geometry and colour settings.
then "SAVED!" will appear under the function menu.
If the function "AUTO SAVE" is ON, you can save automatically at clearing the
Status
Switch
and the input sync. signal are correct.
Refer to "SAVE" below.
Power LED
Power Switch
Sample of "EasyMenu"
And
Advertisement
