Hitachi CM2111M User Manual page 21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..a.....-
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..a.....-
the signal input condition, the monitor will -
indicate the condition automatically,
as follows :
the EasyMenu will indicate the horizontal frequency and
vertical frequency.
Horizontal approximately
Vertical approximately
all LEDs will light continuously, and
the EasyMenu will indicate the message "INVALID SYNC."
for 5 seconds.
connection.
the power LED will blink.
connection.
@When the monitor detects a sync. siqnal which is out of
set-up specification or unstable,
the EasyMenu will indicate the message "INVALID SCAN
FREQ.".
l
When the monitor has detected a change in
the signal input condition, the monitor mutes
the picture automatically.
This function hides scrambled images which may appear
during the changing period of the input signal.
The muting period depends on the time that elapses until
the replaced signal becomes stable.
signal, it will automatically adjust the
following :
Horizontal Position, Horizontal Size,
Vertical Position, Vertical Size,
Pincushion, Trapezoid
(for each video mode)
Rotation, Parallelogram,
Contrast, Brightness, Colour Select
: + 1 kHz
.
15