Hitachi CM2111M User Manual page 19

Red Colour
l
:..............................a..........:
Green Colour
Blue Colour
l
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
following buttons.
[ :. ] and [ 8 ] simultaneously, select the Green colour.
El If the LEDs [ :. ] and [ tB ]I[ 6 ]I[ @I ] are lit already,
pressing the button [ GJ ]I[ e ]I[ e ] without [ :. ] is
vaiid.
value between 0 - 255.
D + :
If any colour is adjusted above 255, the unit will
automatically reduce the values of the remaining
two colours to achieve the expected colour.
makes the selected colour weaker.
If any colour is adjusted weaker, the unit will
automatically increase the values of the remaining
two colours till either colour reaches 255. Then the
unit will reduce thevalue of theselected colour.
Cl When you have adjusted any colour, storing
manually will store the colour balance to No.3,
irrespective of your "Colour Select" selection.
buttons simultaneously
for about 2 seconds,
to cancel the current
colour balance.
The currently adjusted colour balance if not stored will
be canceled, and the previously stored colour balance
will be recalled. You can the restartthe adjustment.
Cl This operation is valid only when the LEDs [ :. ] and
l
About 10 seconds after a change has been
made, the monitor automatically stores the
currently adjusted data for the following
items only :
Contrast, Brightness, Colour Select
storing the new setting will delete the old setting.
settings if you want to turn the monitor OFF.
+
store
13