Hitachi CM2111M User Manual page 13

use a signal cable with a
TABLE l-l
q Insert connector to the "Signal Input Terminal" (13W3 Type D-Sub Connector
Terminal), and secure the screws on the connector shell firmly.
use a signal cable with a
D-Sub Mini 15-pin Connector.
TABLE 1-2
q Insert connector to the "Signal Input Terminal" (D-Sub Mini 15-pin Connector
Terminal), and secure the screws on the connector shell firmly.
sync. signal type will be automatically selected by the monitor, with
the priority shown in TABLE 2.
TABLE 2
I
5
D-Sub Mini 15-pin Connector Terminal
Priority
I
7