Advertisement
Fig.3. Signal cable connec tion
from signal gknerator
generator
from signal
T-type connector
Fig. 4. SignaI cable connection (loop-through state)
S I G N A L C A B L E C O N N E C T I O N
Connect R.G.B. signal BNC connectors to the signal input. Vhen one display is used, the
termination S1 must be switched to '75 DtM' side (see Fig.3).
are used at the sane tine (loop through state), see Fig.4 for connecting cabies.
For
(option) have to be used, and termination
loop-through cpnnection, T-type connectors
be switched to 'High impedance' side other than the last monitor ln line
Advertisement
