Advertisement
l Color Balance Adjustment
button. The LED will flash if it has reached its limit.
color balance No.3 and it can be selected anytime afterwards.
Button")
no key input for IO seconds, the color adjustment mode is cancelled.
q
10 seconds after finishing adjustment, the contrast mode is selected automatically, but
the adjusted color settings are not stored without pressing the store button.
the previously stored user color data, press [+I and [ - ] buttons at the same time
during the color selection mode.
(While the LEDs of [ :. ] and one of [a I/[ 8 I/[ 0 ] buttons remain lit.)
can restart the adjustment.
User Data Clear
(at the power ON only)
(beim Einschalten der Stromversorgung)
l Reset to the original standard settings.
together, all user settings other than brightness and contrast are deleted.
l RQchstellung zur orginalen Standardeinstellung.
Tasten, werden bis auf Helligkeit und kontrast alle Anwenderdaten geloscht.
18
[ +] / [ - ]
makes the selected color stronger.
makes the selected color weaker.
(in the color selection mode)
(refer to "Store
+
Advertisement
