Table of Contents
Advertisement
Color Adjustment
Your own color balance can be set by adjusting each color components
of red, green and blue.
l Color Selection
two LEDs of the button pressed will light.
red/green/blue with [ :.I.
Color Balance Adjustment
l
adjustment mode, and you can adjust each color by [ +] / [ - ] button.
The LED will flash if it has reached its limit.
the user color balance (No.3) and it can be selected anytime afterwards.
"Store Button")
is no key input for about 10 seconds, the color adjustment mode will be cancelled.
l
Color Reset [+ & - ]
recall the previously stored color balance, keep pressing [+I and [ - ] buttons at
the same time. about 2 seconds. in the color adiustment mode.
(While the LEds of [ :.I and one.of [a]/[ 8 ]/r'@l ] buttons remain lit.)
momentarily. Then the picture color balance will be changed to the stored color
balance, selected previously, and you can restart the adjustment.
16
1 84 [EDI/[E3 l/[E!J 1
[+] / [ - ]
makes the selected color stronger.
makes the selected color weaker.
(in the color selection mode)
, -,, +, DE-& 0
I
(refer to
Advertisement
Table of Contents
