Manual Network Setting - For Wireless Lan; Preparation For Wireless Lan Connection - Hitachi CP-X268A User's Manual And Operating Manual

2. Equipment connection and network setting
2.4 Manual network connection setting – For wireless LAN
By installing SD-Link11g card, PC and wireless LAN are able to communicate in
both Adhoc and Infrastructure modes.
How to set up wireless LAN connection manually.

2.4.1 Preparation for wireless LAN connection

Fig. 2.4.1.a Without access point communication (Ad-Hoc)
Fig. 2.4.1.b With access point communication (Infrastructure)
* Ad-Hoc is one of the wireless LAN communication methods without having
access point to communicate.
* Infrastructure is one of the wireless LAN communication methods with having
access point to communicate. If certain quantities of equipments are used, this
If communicating with existing network, contact your network administrator.
First, insert the SD Wireless Network card into SD Card slot (
Manual - Operating Guide).
Then, make PC ready for wireless communication.
In case 802.11b/g wireless LAN device is built-in the PC, make it valid and make
other network connections invalid. If wireless LAN device is not built-in the PC,
connect 802.11b/g wireless LAN device and install device driver. (Refer to the
user guide for PC and wireless LAN device for detail.)
16
16:CP-X268A User's