Troubleshooting - Hitachi CP-X268A User's Manual And Operating Manual

5. Troubleshooting

5. Troubleshooting
Problem
No image
Others
- Information from the
projector to PC is not
correct or completed
- The projector does not
respond
- Image on screen is
freezed
The projector
that you want
to connect to
is nowhere
to be found
on the list
of available
projectors
Can't
communicate
80
Likely Cause
The projector is not turned
on.
The projector's input source
isn't switched to MIU.
Communication between
the projector and PC is not
working well.
MIU Functions of the
projector is not working
well.
The PC and/or projector's
network settings are not
configured correctly.
Weak radio signal
The Projector isn't in Live
Mode
Things to Check
Is the projector's lamp on?
Is the projector switched to
MIU?
Try "MIU RESTART"
in MIU SERVICE MENU.
Check both the PC
and projector's network
settings. If you change the
projector's settings, turn off
the projector's AC power
and then turn it on again.
If you simply put the
projector in STANDBY
power mode and then
turn it on again, the new
settings might not take
effect.
• Bring the PC and
projector closer together
• Radio waves won't go
through concrete and
metal (steel doors, etc.)
Check the mode on MIU
Menu to make sure that it is
in the correct mode.
Reference
Page
Number
*19
*20
*56
8, 10, 16
–
50