Hitachi CP-X268A User's Manual And Operating Manual page 152

Schedule Settings
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter [http://192.168.1.10] into the address bar of the web browser.
2) Enter the Administrator ID and Password and click [Logon].
3) Click [Schedule Settings] on the main menu and select the required schedule
item.
4) Click the [Enable] check box to enable scheduling.
6) Click [Add] and set the hour, command and parameters and click [Add This
Schedule] when you want to add a command.
7) Click the [Delete] button when you want to delete a schedule.
8) Click the [Apply] button to save the settings.
There are three types of scheduling.
NOTE
seconds when at least 1 "Power ON" schedule is saved.
• When the schedule function is used, the power cord must be connected to
schedule function does not work when the power switch is turned off, [ ] or
the breaker in a room is tripped. The power indicator will lights orange or green
when the projector gets is receiving the power.
( 32)
4. Utilize projector – Advanced -
73