Hitachi AX-M717 Instruction Manuals page 12

Setting the Timer
You can set up the system to turn on at a chosen time.
To set the timer:
1. In standby mode, press and hold the Timer button until the hour starts
flashing.
2. Press the
button. The minutes will flash.
3. Press the
button. The Timer indicator will flash for a few seconds, then remain on the
display to show that the timer is set.
To turn the timer off, press the Timer
button. The timer indicator on the display
will disappear.
Setting the sleep timer
You can set up the unit to turn off
automatically after a chosen number of
minutes.
While the unit is switched on, press the
Sleep button to cycle through the sleep
times: 90 -> 75 -> 60 -> 45 -> 30 -> 15 ->
Off.
Wait 5 seconds to return to the previous display. The Sleep indicator will also
appear on the display.
and buttons to set the hour, then press the Timer
and buttons to set the minute, then press the Timer
11