Table of Contents
Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
This adapter kit is recommended for use with Cold Fusion Dispensers and Icemakers that measure 30" wide X
24.5" deep. The icemaker drop zone and bin stat must fit within the footprint shown in figure 1.
1.67"
21.50"
!
WARNING:
Disconnect power to the unit before installing adaptor following all lock out / tag out procedures established by the
user. Verify all of the power is off to the unit before performing any work. Failure to comply could result in serious
injury, death or damage to the equipment.
!
WARNING:
All of the attachment screws and plates must be installed as directed in this manual. Failure to comply could result in
serious Injury, Death or Damage to the equipment.
Release Date: October 8, 2008
© 2008-2010, IMI Cornelius Inc.
F
A
K
OR
DAPTER
IT
(BACK SIDE OF DISPENSER)
ICE MAKER DROP ZONE
AND BIN STAT MUST FIT
WITHIN THE
27.40 X 21.50" OPENING
Figure 1
www.cornelius.com
1 of 4
ColdFusion Icemaker Adapter Kit Installation Instructions
P/N 629096828
30.30"
27.40"
Revision: B
Publication Number: 629096828INS
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Cornelius 629096828
Summary of Contents for Cornelius 629096828
-
Page 1: Installation Instructions
All of the attachment screws and plates must be installed as directed in this manual. Failure to comply could result in serious Injury, Death or Damage to the equipment. www.cornelius.com Release Date: October 8, 2008 Revision: B © 2008-2010, IMI Cornelius Inc. 1 of 4 Publication Number: 629096828INS... - Page 2 KIT MUST BE POSITIONED ALL THE WAY SUPPORT RAILS FORWARD AND COMPRESSED DOWN PRIOR TO DRILLING HOLES. HOPPER DOWN HOLES FOR SECURING KIT ARE LOCATED ON THE SIDES (2 PER) MERCHANDISER Figure 3 Publication Number: 629096828INS 2 of 4 © 2008-2010, IMI Cornelius Inc.
- Page 3 Installation is complete. For optimal performance, Do not fill ice bin to more than 2/3 of capacity. Recommended maximum fill height is four (4) inches from the top of the bin. © 2008-2010, IMI Cornelius Inc. 3 of 4 Publication Number: 629096828INS...
- Page 4 - COMPLETED ASSEMBLY – COLD FUSION DISPENSER WITH ADAPTER KIT P/N 629096828, AND 30” X 24.5” ICE MAKER Figure 5 Publication Number: 629096828INS 4 of 4 © 2008-2010, IMI Cornelius Inc.
Need help?
Do you have a question about the 629096828 and is the answer not in the manual?
Questions and answers