Emerson EM6120-2 User Manual page 5

Connecting
Handset 1
1. Plug one end of the line cord into the jack at the back of the phone's base,
and the other end into a modular phone jack.
2. Connect the AC adaptor as shown above, and plug into a standard
AC outlet.
3. The handset will display "Searching" , wait until "Handset 1" is displayed.
4. Press on the handset and confirm you hear the dial tone.
Handset 2
1. Connect the AC adaptor as shown below, and plug into a standard AC
outlet.
Handset 2 cradle
2. The handset will display "Searching" , wait until "Handset 2" is displayed.
3. Press on the handset and confirm you hear the dial tone.
Handset 2 does not require a telephone jack
line cord
insert here
AC adapter
insert here
AC adapter
modular phone jack
AC Outlet
AC Outlet