Rings To Answer - Emerson EM6120-2 User Manual

Rings to answer

The answering system is factory preset to answer an incoming call after 6
rings, this however may be adjusted by following the instructions below:
To change the "rings to answer" setting:
rings to
1. Press and HOLD the
answer
2. Use the
3. If you select "TS" (toll saver) the answering system will
4. When you are finished, press the
rings to
answer
If voicemail is included as an option from your telephone company, it is
important to set the answering system to answer before the voicemail system
of the phone company, otherwise your messages will be recorded in the
voicemail system of the phone company and not the answering system's
voice mailbox
To check the "rings to answer" setting:
rings to
• Press the
answer
answering system will respond to an incoming call
tone and the following voice prompt, "please set rings" .
buttons to change the number of rings up or down
answer after 5 rings if there are no new messages, and
after 2 rings if there are new messages.
the setting.
rings to
answer
rings to security
answer code
delete
button until the system emits a
rings to
answer
button to check how many rings before the
Press to check or press and HOLD
to adjust
button to confirm
rings to
answer
"6 rings"