Additional Handsets; Adding A New Handset; Removing A Handset - Emerson EM6120-2 User Manual

Additional handsets

It is possible to register up to 5 handsets to the base (2 handsets are
included) additional handsets may be purchased separately. If you
would like to purchase additional handsets, please contact our customer
service department at: 1-877-768-8483 (Toll Free) or cs@southerntelecom.com

Adding a new handset

The two handsets that are included in this package are
already registered, use the steps below to register new
handsets only.
1. Press the
2. Use the ▲ and ▼ buttons and select "Handset" and
3. Use the ▲ and ▼ buttons and select "Registration" and
4. Select "Register" and press the
5. Select "Base 1" and press the
6. When "System PIN:" appears on the display enter 0000
7 . When "Press And Hold Page Key On Base" appears on
8. Press

Removing a handset

Use to remove handsets that are damaged.
1. Follow steps 1-3 (above).
2. Select "De-register"and press
3. Enter system pin 0000 and press the
4. When "Select HS" appears enter the handset number
press the
press the
and press the
the display, press and HOLD the
base (approximately 30 seconds) until "Handset 3, 4, or 5"
appears on the display.
on the handset and confirm you hear the dial tone.
press and hold to register the handset
of the handset you would like to remove (it must be a
handset other then the one you are using) and press the
softkey. "Not Registered" will appear on the
removed handset.
button to enter the menu.
softkey.
softkey.
softkey.
rings to security
answer code
softkey.
softkey.
button on the
the softkey.
softkey.