Download Print this page

Emerson EM6130 User Manual

Digital cordless phone triple handset answering system
Hide thumbs

Advertisement

Quick Links

_
Digital

Cordless Phone

triple handset answering system
Includes
Speakerphone
Digital
3 handsets
User Guide
EM6130
The handset / Using the phone
Standby Screen
Handset 1
Handset 2
Handset 3
Answer calls
• answer a call
• start a call
• dial a number from the phonebook or Caller ID history
• activate / deactivate speakerphone
End calls
• end a call
talk screen
• in the menu, escape to
the standby screen
Press the
soft key
00:30
to mute or disable mute
Mute Soft Key
Call Waiting / Flash
The Flash feature is used to activate calling services available through your local phone
company, such as Call Waiting, and Three Way Calling. To use the features below you
must subscribe to these services from your local telephone company.
To answer an incoming call while having a conversation:
After you hear the Call Waiting tone, press and release the
button. The first call is placed on hold and the second
call is answered.
press to
flash
To return to the first call and put the second call on hold:
Press and release the
button again to return to the
first call, the second call will be put on hold.
To activate Three Way Calling:
Press and release the
button while on the first call,
you will hear a dial tone. Dial a second number, and press
the
button again to connect the two calls.
In the box
Handset 2
Handset 3
User Guide
Handset 1
(3) Rechargeable
Base
Batteries
Line Cord
(3) AC
Cradle 1
Cradle 2
Adaptors
Speaker
• to use the speakerphone,
press the
button,
this can be done before
or during a call
Volume
volume screen
• during a call or while using
the speakerphone, use the
▲ and ▼ buttons to increase
or decrease the volume
Redial
• to redial a number, press and HOLD the
button,
then use the ▲ and ▼ buttons to select from a list of
recently dialed numbers, and press
to make the call
redial screen
555-555-1111
555-555-2222
555-555-3333
555-555-4444
Option
Caller ID / Call Waiting Caller ID
IMPORTANT: In order to use this unit's Caller ID features, you must subscribe to
either the standard Name/Number Caller ID Service or Call Waiting Caller ID Service
from your local telephone company.
This telephone automatically displays an incoming caller's name and telephone
number, as well as the date and time of the call. It can record and store the
information of up to 30 calls into the phone's Caller ID memory.
Reviewing Caller ID information:
• In the standby mode, use the ▲ and ▼ buttons to
review the Caller ID history
• you can select a number and press
to dial it
• to save a number to the phonebook, press the
softkey and then select "Save Number" and press the
softkey to confirm and save
Caller ID screen
Caller ID options screen
EMERSON
Save Number
877-768-8483
Delete
Aug 20 12:30
Delete All
New
Option
Soft Keys
You can delete a number, or all numbers from the Caller ID history in
the Caller ID options screen
Getting started
Installing the battery
Figure 1
1. Open the battery cover.
2. Plug the battery connector securely
into the socket inside the handset
battery compartment. Be sure to
match the colors as shown in figure 1.
3. Insert the battery as shown in figure 2.
4. Close the battery cover.
5. Place the handset on the base
to charge.
Before using for the
Figure 2
first time, charge the
handset for 12-16 hours
Wall Mounting
To mount your telephone on a wall plate (not included),
follow the instructions below:
1. Plug the line cord into a modular phone jack.
2. Align the holes on the base and / or cradles with the mounting studs on
the wall plate.
3. Pull the base down onto the studs until the telephone is secure.
wall plate
Phonebook
The phone can store up to 50 names and numbers in its phonebook.
Caller information may be saved from the received calls in the Caller ID
memory (see "Reviewing Caller ID information"), or entered manually.
Dialing a number from the phonebook:
1. Press the
button to open the phonebook.
2. Use the ▲ and ▼ buttons to navigate up or down.
3. Press the
button to dial the selected number.
phonebook screen
John Smith
Mike Hayes
Paul Williams
Angela Dotson
Adding numbers to the phonebook:
1. Press the
button to open the phonebook.
2. Press the
softkey, and select "New Entry"
from the phonebook options screen and press the
softkey.
multi-press
for a,b, or c
3. Use the handset keypad to enter a name for the entry
by multi-pressing a key until the desired letter is displayed.
4. Press
to add a space and the
softkey to
add space
to make a correction.
5. When finished entering the name, press the
softkey.
small letters /
capital letters
6. Enter the number using the handset keypad.
7 . When finished entering the number, press the
softkey.
8. Select a ring tone and press the
softkey to
save the number in the phonebook.
9. It is possible to edit and delete numbers in the
phonebook from the phonebook options screen.
phonebook screen
phonebook options screen
John Smith
New Entry
Mike Hayes
Edit Entry
Paul Williams
Show Details
Angela Dotson
Delete Entry
Option
Soft Keys
entry screen (name)
entry screen (number)
Name:
abc
Number:
John Smith
Soft Keys
Rechargeable battery warning
● This equipment contains a rechargeable battery.
● Rechargeable batteries are known to the State of California to cause cancer.
● Do not short-circuit the battery.
● The rechargeable batteries contained in this equipment may explode if
disposed of in a fire.
● Do not charge the battery used in this equipment in any charger other
than the one designed to charge this battery as specified in the owner's
manual. Using another charger may damage the battery or cause it to explode.
Telephone jack requirements
To use this phone, you must have an RJ11C modular
telephone jack. If you do not have a modular jack,
please call your local telephone company to find out
how to get one installed.
Modular Telephone
Line Jack
Important installation information
● Never install telephone wiring during a lightning storm.
● Never touch uninsulated telephone wires or terminals, unless the
telephone line has been disconnected at the network interface.
● Use caution when installing or modifying telephone lines.
● Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
● Temporarily disconnect any equipment connected to the phone, such as
faxes,other phones, or modems.
CAUTION: Disconnect the phone cord from the
wall outlet before installing or replacing the
batteries. (Only for telephones which require
batteries)
Using multiple handsets
Intercom
1. To use the intercom, press and HOLD the
button.
2. Dial the number of the handset you would like to call.
3. Press
to end the intercom (internal) call.
intercom screen
Internal_
Receiving an intercom (internal) call
1. Press
to accept the internal call.
2. During the call, the handset number of the caller is displayed.
3. Press
to hang up.
Receiving an external call during an intercom
(internal) call
If you receive an external call during an internal call, a call
waiting tone (double beep) will be heard on both handsets.
1. Press
to end the internal call.
2. Press
to accept the external call.
Transferring a call to another handset
1. Press and HOLD the
button.
2. Dial the number of the handset you would like to transfer
the call to.
3. If the handset dialed answers, you can have an internal
conversation.
4. Press
to end the internal conversation and transfer
the call.
5. If the handset dialed does not answer, press
to
speak to the external caller again.
Conference call (2 internal handsets and an
external caller)
1. While on the line with an external caller, press and HOLD
the
button (the external line is put on hold).
2. Dial the number of the handset you would like to include
in the call.
3. If the handset dialed answers, press the
soft
CONF
key to merge the calls.
conference screen
Handset 1
CONF
Soft Key
Connecting
Handset 1
1. Plug one end of the line cord into the jack on the bottom of the phone's
base, and the other end into a modular phone jack.
AC adapter
AC Outlet
line cord
modular phone jack
2. Plug the pin of the AC adaptor into the DC6V jack on the bottom of the
base as shown above, and plug into a standard AC outlet.
3. The handset will display "Searching" , wait until "Handset 1" is displayed.
4. Press
on the handset and confirm you hear the dial tone.
Handsets 2 & 3
1. Plug the pin of the AC adaptors into the DC6V jack on the bottom of the
cradles and plug into standard AC outlets.
insert here
AC adapter
AC Outlet
Handsets 2 & 3 cradles
2. The handset will display "Searching" , wait until "Handset 2" &
"Handset 3" is displayed.
3. Press
on the handset and confirm you hear the dial tone.
Handsets 2 & 3 do not require telephone jacks
Copy a phonebook entry to another handset
1. Press the
button to open the phonebook.
2. Search by entering the first letter of the desired name
or use the ▲ and ▼ buttons to navigate up or down.
3. Press the
softkey and select "Copy Entry" and
press the
softkey.
or
Select "Copy All" to copy all entries from one handset to
another (this will erase all the information on the destination
handset).
or
Select "Copy-Merge" to copy all entries from one handset
to another (the information on the destination handset is
not deleted).
4. The available handsets are displayed, use the ▲ and ▼
buttons to select the correct handset and press the
softkey to confirm.
5. "Copying to Handset" is displayed, and "Receive Phone
book Record?" appears on the display of the destination
handset.
6. On the destination handset, press the
softkey
to confirm.
Additional handsets
It is possible to register up to 5 handsets to the base (3 handsets are
included) additional handsets may be purchased separately. If you
would like to purchase additional handsets, please contact our customer
service department at: 1-877-768-8483 (Toll Free) or cs@southerntelecom.com
Adding a new handset
The two handsets that are included in this package are
already registered, use the steps below to register new
handsets only.
1. Press the
button to enter the menu.
2. Use the ▲ and ▼ buttons and select "Handset" and
press the
softkey.
3. Use the ▲ and ▼ buttons and select "Registration" and
press the
softkey.
4. Select "Register" and press the
softkey.
5. Select "Base 1" and press the
softkey.
6. When "System PIN:" appears on the display enter 0000
and press the
softkey.
7 . When "Press And Hold Page Key On Base" appears on
the display, press and HOLD the
button on the
base (approximately 30 seconds) until "Handset 4, or 5"
appears on the display.
8. Press
on the handset and confirm you hear the dial tone.
press and hold to register the handset
Removing a handset
Use to remove handsets that are damaged.
1. Follow steps 1-3 (above).
2. Select "De-register"and press
the softkey.
3. Enter system pin 0000 and press the
softkey.
4. When "Select HS" appears enter the handset number
of the handset you would like to remove (it must be a
handset other then the one you are using) and press the
softkey. "Not Registered" will appear on the
removed handset.

Advertisement

loading

  Related Manuals for Emerson EM6130

  Summary of Contents for Emerson EM6130

  • Page 1: Cordless Phone

    Line Cord (3) AC Cradle 1 Cradle 2 EM6130 Handsets 2 & 3 do not require telephone jacks Adaptors The handset / Using the phone Speaker Phonebook Using multiple handsets...
  • Page 2 In case of such temporary discontinuance, the DO NOT OPEN antenna or transmitter. Emerson and the G-Clef logo are registered trademarks of 1-877-768-8483 (Toll Free) telephone company must: (1) promptly notify you of such temporary discontinuance; (2)