Emerson EM6120-2 User Manual

Digital cordless telephone dect 6.0


Quick Links


Cordless Phone

Lighted Display
2 handsets
User Guide


Table of Contents

Summary of Contents for Emerson EM6120-2

  • Page 1: Cordless Phone

    Digital Cordless Phone Includes Lighted Display Speakerphone Digital 2 handsets User Guide EM6120-2...
  • Page 2: Rechargeable Batteries

    In the box Handset 1 Line Cord (2) Rechargeable Batteries Handset 2 and cradle Large Bracket Adapter rings to security answer code Base Small Bracket User Guide...
  • Page 3: Getting Started

    Getting started Installing the battery 1. Open the battery cover. 2. Insert the battery. Be sure to insert exactly as shown. 3. Close the battery cover. 4. Place the handset on the base to charge. Before using for the first time, charge the handset for 12-16 hours Installing the bracket 1.
  • Page 4: Telephone Jack Requirements

    Rechargeable battery warning ● This equipment contains a rechargeable battery. ● Rechargeable batteries are known to the State of California to cause cancer. ● Do not short-circuit the battery. ● The rechargeable batteries contained in this equipment may explode if disposed of in a fire.
  • Page 5 Connecting Handset 1 1. Plug one end of the line cord into the jack at the back of the phone’s base, and the other end into a modular phone jack. 2. Connect the AC adaptor as shown above, and plug into a standard AC outlet.
  • Page 6 The handset / Using the phone Standby Screen Handset 1 Handset 2...
  • Page 7 Speaker to use the speakerphone, • press the this can be done before or during a call Volume • during a call or while using the speakerphone, use the ▲ and ▼ buttons to increase or decrease the volume Redial •...
  • Page 8: Phonebook Screen

    Phonebook The phone can store up to 50 names and numbers in its phonebook. Caller information may be saved from the received calls in the Caller ID memory (see "Reviewing Caller ID information"), or entered manually. Dialing a number from the phonebook: 1.
  • Page 9: Answer Calls

    Answer calls • answer a call • start a call • dial a number from the phonebook or Caller ID history End calls • end a call • in the menu, escape to the standby screen Press the to mute or disable mute Call Waiting / Flash The Flash feature is used to activate calling services available through your local phone company, such as Call Waiting, and Three Way Calling.
  • Page 10: Caller Id / Call Waiting Caller Id

    • to save a number to the phonebook, press the softkey and then select “Save Number” and press the Caller ID screen EMERSON 877-768-8483 Aug 20 12:30 You can delete a number, or all numbers from the Caller ID history in...
  • Page 11: Using Multiple Handsets

    Using multiple handsets Intercom 1. To use the intercom, press and HOLD the 2. Dial the number of the handset you would like to call. 3. Press Receiving an intercom (internal) call 1. Press 2. During the call, the handset number of the caller is displayed. 3.
  • Page 12: Copy A Phonebook Entry To Another Handset

    Copy a phonebook entry to another handset 1. Press the 2. Search by entering the first letter of the desired name or use the ▲ and ▼ buttons to navigate up or down. 3. Press the press the Select “Copy All” to copy all entries from one handset to another (this will erase all the information on the destination handset).
  • Page 13: Additional Handsets

    Additional handsets It is possible to register up to 5 handsets to the base (2 handsets are included) additional handsets may be purchased separately. If you would like to purchase additional handsets, please contact our customer service department at: 1-877-768-8483 (Toll Free) or cs@southerntelecom.com Adding a new handset The two handsets that are included in this package are already registered, use the steps below to register new...
  • Page 14: Menu Screen

    Menu Use the menu to customize various settings such as ringer volume, ring tones, language, display settings and more. 1. Press the 2. Use the ▲ and ▼ buttons to navigate from the following menu selections: Phonebook - Access the phonebook Handset - “Ring Tone”(incoming calls/intercom), “Ringer Volume”...
  • Page 15: The Base

    The base Volume • Adjust the volume of the base • Adjust the “rings to answer” option (how many rings until the answering system picks up the call) • Adjust the “security code” option (the security code is factory set to 000) From the handset’s menu you can adjust the base’s ringer volume or select ringtones - select menu >...
  • Page 16: Answering System

    Answering system Power on/off To turn the answering machine on or off: • Press the on or off Outgoing message The answering system includes the following factory pre-recorded message: “Hello, your call cannot be taken at the moment, so please leave a message after the tone.
  • Page 17: Playback Messages

    Playback messages When new messages are recorded on the answering system, the display will flash with the number of new, unheard messages recorded. After all the new messages have been played back, the number of messages played back but not deleted (old messages) will appear on the display but will not flash.
  • Page 18 “8 messages, 5 new messages” “message 1 Thursday, 12:00 PM” the message is played back To skip messages: • Press the next message buttons to skip to the previous or...
  • Page 19: Deleting Messages

    Deleting messages The answering system can record up to 11 minutes of incoming messages in its voice mailbox. It is important to manage and delete messages that have already been heard. In the event that the voice mailbox of the answering system is full, the following message will be played back to incoming callers attempting to leave a message “Hello, the voice mailbox is full, please call back later - thank you”...
  • Page 20 “message erased” Press and HOLD while a message is rings to security answer code delete playing to delete it “all messages erased” rings to security answer code Press and HOLD during standby mode delete (while no messages are playing) When “dL ” appears on the display, press the all messages button to delete...
  • Page 21: Rings To Answer

    Rings to answer The answering system is factory preset to answer an incoming call after 6 rings, this however may be adjusted by following the instructions below: To change the “rings to answer” setting: rings to 1. Press and HOLD the answer tone and the following voice prompt, “please set rings”...
  • Page 22: Remote Access

    Remote access It is possible to access your messages and control the answering system from anywhere using a standard telephone and the factory preset security code (000), or you can select your own security code. To remotely access your answering system: 1.
  • Page 23 To change the security code: security 1. Press and HOLD the code tone and the following voice prompt, “please set security code” . 2. Use the press the 3. Repeat step number 2 until all three digits of the security security code code are set and the answering system confirms the code...
  • Page 24: Important Safety Instructions

  • Page 25: Compliance Information

    Compliance information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. FCC Part 68 information 1.
  • Page 26: Fcc Rf Exposure Information

    FCC Part 15 information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 27: Limited Warranty

    Limited Warranty 90 Days Limited Warranty In the unlikely event that this product is defective, or does not perform properly, you may within ninety (90) days from your original date of purchase return it to the authorized service center for repair or exchange. TO OBTAIN WARRANTY SERVICE: ●...
  • Page 28 Distributed by: AIT, Inc. Brooklyn NY 11232 © 2010 All rights reserved Emerson and the G-Clef logo are registered trademarks of Emerson Radio Corp. Parsippany, New Jersey USA Information for DECT products This telephone is compliant with the DECT 6.0 standard which operates in the 1.92GHz to 1.93GHz frequency range.

Table of Contents