Features
Additional Features
Armchair Programming
There is no need to stand at the wall where the thermostat is mounted while
programming or changing settings. Simply remove the thermostat from the
wall and make the necessary changes in the comfort of a chair. You can also
set your programming and settings before you even install the thermostat.
Power Failure Protection
In the event that power is lost, the batteries will act as backup, saving your
settings and programs.
System Protection
To protect your system from cycling, system turning on and off rapidly, your
thermostat will prevent your system from turning back on for up to 3 minutes
after it has been shut down.
Reset
In situations where your thermostat may not seem to be operating properly
or if you just want to reset and start over, press and hold the
buttons for 5 seconds until the screen flashes "Updated!". This will restore the
thermostat to factory condition.
32
6
44067-01 • 10/13/2010
and