Hunter 44132 Owner's Manual page 16

5-2 programmable weekdays-weekends
Hide thumbs Also See for 44132:
Table of Contents

Advertisement

Scheduling
Setting Your Schedule
5. Use the
or
for the period and press
adjust the end time on the right of the screen for this scheduled period.
Press
again.
Next
6. Set the temperature for your heating cycle as indicated by the flashing
heat to arrow on your screen. Use the
temperature and press
indicated by the flashing the cool to arrow. Set this temperature with your
or
buttons and hit
7. The thermostat will start this process again for "Asleep". Repeat steps 1-5
to schedule the time and set the temperature for your sleep period. When
finished pressed
8. When setting "At Home", you will only be asked to set a temperature. The
thermostat calculates your "At Home" time by what remains unscheduled
from your "Away" and "Asleep" periods. Set your "Heat To" temperature
first and press
Scheduling.
9. If you are scheduling the day periods in order (Weekdays then Weekends),
the screen will flash "Updated!"and take you to the weekend period.
10. When you have completed all scheduling, press
11. If you skipped a section, or are only programming the weekend, the
Thermostat will show "Updated!" and return you to the Home screen.
16
buttons to adjust the start time on the left of the screen
. Again you will use the
Next
. You will be asked to set your cooling cycle,
Next
.
Next
to get to "At Home".
Next
, then Set your "Cool To" temp and press
Next
44067-01 • 10/13/2010
5
or
and
buttons to change the
to finish.
Done/
Home
buttons to
To finish
Next

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

44127

Table of Contents