Turning Bluetooth On Or Off; Protecting The Hp Ipaq Screen From Cracking Or Damage - HP Rx5915 - iPAQ Travel Companion Product Information Manual

For more information, refer to Additional Product Information located on the Getting Started CD.

Turning Bluetooth On or Off

To turn on Bluetooth:
1. Tap Start > Today > iPAQ Wireless.
2. On the iPAQ Wireless screen, tap the Bluetooth icon.
When Bluetooth is turned on, the wireless LED on your HP iPAQ flashes blue.
To turn off Bluetooth, tap the Bluetooth icon again. When Bluetooth is turned off, the Bluetooth LED
turns off and no incoming or outgoing Bluetooth connections are possible.
Tip

Protecting the HP iPAQ Screen from Cracking or Damage

CAUTION
drops, impacts, or pressure.
To reduce the risk of damage to the internal components, do not spray liquid directly on the
screen, or allow excess liquid to drip inside your HP iPAQ. Using soap or other cleaning products
on the screen might discolor the finish and damage it.
●
Observe the following practices to protect the screen of your HP iPAQ from damage:
●
Do not sit on your HP iPAQ.
●
When transporting your HP iPAQ in a purse, pocket, briefcase, etc., ensure the device does
not get compressed, bent, dropped, or hit.
●
When not in use, use the protective screen cover (if one is available) on your HP iPAQ and
store it in a case. Select from a wide variety of case options at
ipaq
● Do not place anything on top of your HP iPAQ.
● Do not bang your HP iPAQ against hard objects.
●
Never use any device other than the stylus that comes with the HP iPAQ or an approved
replacement to tap or write on the screen. If you lose or break your stylus, order extras at
www.hp.com/accessories/ipaq.
● Clean your HP iPAQ by wiping the screen and the exterior with a soft, damp cloth lightly moistened
only with water.
To save battery power, turn Bluetooth off when you are not using it.
The screen of your HP iPAQ is made of glass and can be damaged or broken by
or www.casesonline.com.
www.hp.com/accessories/
40