Setting The Clock - Emerson CKD3630 Owner's Manual

OPERATING INSTRUCTIONS
• Make sure you have installed the back-up battery in the battery
compartment.
• Make sure you have extended the FM Lead Wire Antenna to its full
length.
• Connect the AC power cord plug to a 120V 60Hz AC outlet.

SETTING THE CLOCK

When the radio is connected to the AC outlet for the first time the display will show
flashing "12:00".
1.) First depress and hold the TIME/DISPLAY button and then press the SKIP
FWD. button or the SKIP REV.
back to the correct time. The display will move slowly at first, and then begin to
move rapidly.
2.) Be sure to set correctly for AM or PM. If the AM indicator is ' On' , the time
displayed is AM. When the display shows the correct time, release all the
buttons.
CKD3630_060404.p65
button to adjust the display forward or
9
9 4/6/2004, 15:19