Coleman 5038 Series Instructions For Use Manual page 4

To Set Up
NOTE: Use 16.4 oz disposable propane cylinders
LP-gas cylinder(s) used with catalytic heaters must
the specifications for LP-gas cylinders of the U.S.
Department of Transportation or Transport Canada,
CAN/CSA B339.
The unit is completely assembled. Features
identified are Burner, Heater Valve, Support Legs,
and Ignition Button (Electronic Ignition only).
Burner
Support Ignition
Leg Button
CAUTION
cylinder and heater propane connections for damage
before attaching.
4
Turn HEATER VALVE
to OFF.
Attach CYLINDER
to HEATER outdoors.
Heater
Valve
Rotate both Support
Legs into operating
position.
Support
Leg
Position HEATER as
shown on flat surface.
To Light
DANGER
• EXPLOSION - FIRE HAZARD
places. If you smell gas, leave the area immediately.
never while heater is lighted, near flame, pilot lights,
other ignition sources or while heater is hot to touch.
flammables too close to the burner. Keep flammables at
least 24 inches from the sides and 24 inches from the
top of the heater. Keep gasoline and other flammable
liquids and vapors well away from heater.
WARNING
• BURN HAZARD
Never leave heater unattended when hot or in use.
Keep out of reach of children.