Advertisement
Quick Links
When You Are Ready To Set Up Your
Shelter
–Select a level area clear of rocks,
branches and other hard or sharp objects.
–Do not set up your shelter under trees.
–For easier set up, two or more people
are recommended.
–Place fabric in center of selected location
and assemble above fabric.
1
Pole Assembly
–You will need to assemble and connect one
pole at a time to the hub.
–Do not completely assemble poles.
a) Beginning at spring-clip end of pole,
assemble all but the last shock-corded
section. The pole and one section
should curve downward. (illus. 2)
b) Insert the spring-clip end into one of the
hub ports until it clicks into position.
(illus. 1), (illus. 2)
c. Repeat for each of the five remaining
poles (illus. 2)
14' x12' Convertible Insta-Clip Shelter
Instructions apply to Part Number 9600-141
ASSEMBLY PARTS
Poles (6) Part No. 9392-2281
Hub (1) Part No. 9392-2351
Hub
Insta-Clips
Illus. 2
Shelter laid out in position
with partially assembled frame
locked into hub.
Hub
Illus. 1
Poles inserted
into hub
Advertisement
Related Manuals for Coleman 9600-141
Summary of Contents for Coleman 9600-141
- Page 1 14’ x12’ Convertible Insta-Clip Shelter Instructions apply to Part Number 9600-141 ASSEMBLY PARTS When You Are Ready To Set Up Your Shelter –Select a level area clear of rocks, branches and other hard or sharp objects. –Do not set up your shelter under trees. –For easier set up, two or more people Poles (6) Part No.
- Page 2 STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF. NEVER PULL ON THE SHELTER FABRIC OR STAKE LOOP TO REMOVE STAKE. • SHELTER POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER THE COLEMAN CO., INC. DURING STORAGE. 3600 N. Hydraulic • Wichita, Kansas 67219 •...