Advertisement
Quick Links
When You Are Ready To Set Up Your Tent
–Select a level campsite clear of rocks, branches and
other hard or sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions, position the end
of tent into the wind.
–See owners manual for more tips.
1
Frame Pole Assembly
–The frame is a unique one piece
shock-corded design
–Step 1: Assemble the ridge pole.
(illus. 1)
–Step 2: Extend each leg fully by
connecting the shock corded poles.
(illus. 2)
Connect Tent to Frame
2
–Unfold and position the tent with the door
facing the desired direction. (illus. 3)
– Attach the poles to the tent corners using
the pin & ring system by inserting the pin
into the end of the pole. Repeat for each
corner. (illus. 4 & 5)
–Stake down tent corners by inserting tent
stake through the ring of the pin & ring
system. (illus. 6)
illus. 6
Stake
corners through the
pin & ring system
10'x8' Outdoorsman
Instructions apply to Part Number 9280A108
illus. 5
Pin & ring system
POLE ASSEMBLY PARTS
Tent Frame Part No. 9280-103
Rainfly Part No. 9280A101
illus. 1
illus. 2
illus. 3
illus. 4
Tent
™
Advertisement
Related Manuals for Coleman 9280A108
Summary of Contents for Coleman 9280A108
- Page 1 10’x8’ Outdoorsman Tent ™ Instructions apply to Part Number 9280A108 POLE ASSEMBLY PARTS When You Are Ready To Set Up Your Tent –Select a level campsite clear of rocks, branches and Tent Frame Part No. 9280-103 other hard or sharp objects. Rainfly Part No.
- Page 2 TENT POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER DURING STORAGE. • THE COLEMAN CO., INC. Seam sealer has not been provided with your tent. We recommend seam sealing your tent prior to camping. Seam sealer may be purchased through 3600 N. Hydraulic • Wichita, Kansas 67219 your local retailer or at your local sporting goods store.