Table of Contents
Advertisement
HK25 O/M.QXD
8/21/01
3:00 PM
REPEAT PLAYBACK
1
1
To repeat all of the tracks on a
disc continuously, press the
REPEAT Button
Repeat indicator appears in the
display.
Press
PLAY/PAUSE (❿ ) Button
begin all tracks repeat.
PROGRAMMED PLAYBACK
The CD player in this unit has a 20-track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1
Set the FUNCTION Switch to the
CD position.
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
Page 8
2
2
2
1
To repeat a single track, press the
REPEAT Button
once. The
Repeat 1 indicator will appear in
the display. Press the Skip/
the
CD
Forward (
(
) Buttons
to
specific track that you wish to
repeat. When the desired track
number appears in the display,
press the CD PLAY/PAUSE (❿ )
Button
to begin playback. The
specific track you selected will be
repeated continuously.
2
Open the CD Compartment door
and insert your disc in the CD
player. Close the CD compartment
door. Wait for the CD player to read
the table of contents and display the
total number of tracks on the disc.
3
3
3
2
To cancel Repeat Playback,
twice. The
press the REPEAT Button
the Repeat indicator disappears
from the display. You can also
) or Skip/Reverse
cancel Repeat Playback by
to select the
pressing the CD STOP ( ) Button
or by setting the FUNCTION
Switch
position.
3
Press the CD PROGRAM Button.
The Program indicator appears in
the display and the Program
Memory #1 flashes.
8
1
2
until
to the TAPE(Off)
Advertisement
Table of Contents
