Emerson Turbo HD8003 Owner's Manual page 17

6.) After the last programmed track has played the player stops and the display
again shows the total tracks and playing time.
However the programmed sequence remain
in the memory.
Press the PROG/MEMORY button, then the POWER ON – PLAY/PAUSE
button to play the programmed sequence again.
7.) To erase the programmed sequence from the memory press STOP
at stop mode, open the CD door, or set the CD/RADIO selector to the RADIO
position.
PROGRAMMED REPEAT PLAYBACK
You may use the Program and Repeat Playback functions together to continuously
repeat a programmed sequence of tracks. Follow
steps 1 through 5 above to begin programmed
playback and then press the MODE button twice
until the Repeat ALL (
appear in the display. The programmed sequence will be repeated continuously.
HD8003_ib040403.p65
ALL) indicators
16
16
CD-RW
ALL
CD-RW
PROG
4/4/2003, 14:17
button