Programmed Playback - Emerson Turbo HD8003 Owner's Manual

PROGRAMMED PLAYBACK

You can program the player to play just the tracks you want to hear in the specific
order that you want them to play. A maximum of 24 tracks can be programmed.
Note: You cannot program tracks during playback. If a disc is playing press
the STOP – POWER OFF button once to stop playback before you perform
the programming steps below.
1.) While the total tracks and playing time appear
in the display press the PROG (Program)/
MEMORY button. The PROG indicator
appears in the display together with the track number "0 0" and the program
memory number "P – 01".
2.) Press the or
track to be programmed.
Example: Track number 7.
3.) When the desired track number appears in
the track display press the PROG/MEMORY
button again to enter track number 7 into
program memory number 1. The track number display returns to "0 0" and the
program memory number advances to "P – 02".
4.) Repeat steps 2 and 3, selecting a different track number each time until you
entered up to 24 tracks in the CD program memory.
Note: The same track number can be programmed more than once if desired.
5.) After you have entered up to 24 tracks in the CD program memory press the
POWER ON – PLAY/PAUSE
begin programmed playback. The PROG
indicator remains in the display. The tracks
you programmed will be played in the desired order.
HD8003_ib040403.p65
buttons to select the first
button to
15
15
CD-RW
PROG
CD-RW
PROG
CD-RW
PROG
CD-RW
PROG
4/4/2003, 14:17