Answering Machine Messages; Using The Direct Key - Clarity E713CC User Manual

Record/play/delete personalized announcement
1. Press <OK/MENU> and <UP/DOWN> to select Answering sys.
2. Press <OK/MENU> and <UP/DOWN> to select Announcement. Display
shows Play (2) Del (3) Rec (7)
3. To record your announcement, press 7; wait for the beep and start speaking; press 5
when finished.
4. To play the current announcement, press 2; you will hear your announcement (if
recorded) or the pre-loaded default announcement.
5. To delete (restore default announcement), press 3; you will hear a confirmation beep,
the display shows Annc deleted.

ANSWERING MACHINE MESSAGES

Play messages on the answering machine
If you have new messages, the display will show e.g. 01/02 MSGS, which means you have
1 new message out of total 2 messages. New messages are played first, and then are
saved as old messages, until they are deleted. Old messages are played again after all new
messages are played completely.

Using the direct key

In idle
1. Press <PLAY/STOP> to listen to messages and memos.
2. Press <PLAY/STOP> if you want to stop the playback.
3. Press <REPEAT / RD/P> once if you want to repeat the current message from
the beginning, or press twice to skip back to the previous message during
message playback.
4. Press <SKIP FORWARD / INT> if you want to skip forward to the next
message during message playback.
5. Press < X > if you want to delete the current message being played.
Note: You cannot delete New Messages, so you will have to play them before trying
to delete.
28
USING YOUR CORDED BASE