Table of Contents
Advertisement
TXT (Teletext) Language
Press " " or " " button to select Teletext Language.
Use " " or " " button to change Teletext Language to
West, East, Cyrillic, Turk/Gre, Arabic or Persian.
HDMI PC Full Mode
If you want to view PC screen in HDMI mode by using
external connection, HDMI PC FULL MODE option
should be On to adjust the screen ratio correctly. This
item might be inactive in some resolutions.
Note: If you connect an HDMI device and switch the TV to
HDMI mode, this feature will be visible (except for 480p/576p
resolution).
Full Mode (optioanal)
If you connect a device via HDMI or YPbPr connectors
and set 1080i/1080P resolutions, Full Mode item will
be visible.You can set Full Mode as 1:1 or Normal
by using " " or " ".If you select 1:1, screen ratio will
be adjusted correctly. If you set Normal, screen ratio
may expand.
Ext Out
Press " " or " " button to select Ext Out. Use " " or
" " button to set the Ext Out as On or Off.
Note:
For copying from a DVD or VCR device, you should choose
desired source from source menu and turn "On" to EXT Out
from feature menu.
Install Menu
Program
Press " " or " " button to select Program. Use " "
or " " button to select the program number. You can
also enter a number using the numeric buttons on the
remote control. There are 200 programme storage
between 0 and 199.
Band
Band can be selected either C or S. Press " " or
" " button to set Band.
Channel
Channel can be changed by " " or " " button or
numeric buttons.
Colour System
Press " " or " " button to select Colour System.
Use " " or " " button to change the colour system to
AUTO, PAL, SECAM or PAL60.
Sound System
Press " " or " " button to select Sound System.
Press " " or " " button to change the sound system
to BG,DK, I, L or L'.
Fine Tune
Press " " or " " button to select Fine Tune. Press "
" or " " button to adjust the tuning.
Search
Press " " or " " button to select Search. Use " "
or " " button to start programme searching. You can
also enter the desired frequency using the numeric
buttons while Search item is highlighted.
Store
Press " " or " " button to select Store. Press " "
or OK button to store the settings. " Stored..." will be
displayed on the screen.
Install Menu in AV Modes
The following screen appears in the install menu when
the TV is in AV modes. Note that limited options will
be available. Switch to TV mode for viewing complete
version of the Install menu.
Colour System
Press " " or " " button to select Colour System.
Use " " or " " button to change the colour system to
AUTO, PAL, SECAM, PAL60, NTSC 4,43 or NTSC
3,58.
Store
Press " " or " " button to select Store Program.
Press " " or OK button to store the settings.
"Stored..." will be displayed on the screen.
English - 25 -
Advertisement
Table of Contents
