By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except the AV
mode). By cursor action, programme selection is done
To change the name of a decided programme, se-
lect the programme and press the RED button.
The first letter of the selected name will be high-
button to select the other letters. By pressing
the RED button, you can store the name.
Select the programme which you want to insert by
navigation buttons. Press the GREEN button. By navi-
gation buttons move the selected programme to the
decided programme space and press the GREEN
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the se-
lected programme from the programme list, and the
programmes below shift one up.
APS (Auto Programming System)
When you press the BLUE button for APS, Auto
Programming System Menu will appear on the
A.P.S. (Auto Programming System) Country
button to select your country. If you want
to exit from A.P.S. function, press the BLUE button.
When you press OK or RED button for starting APS,
all stored programs will be erased and the following
screen will be displayed:
button to change that letter and
APS is running...
Whenever you press the BLUE button, A.P.S. func-
tion stops and Program Table appears on the screen.
If you wait until the end of A.P.S., Program Table is
displayed with the programmes found and located.
Install menu in AV modes
The following screen appears in the install menu:
system to PAL, SECAM, PAL 60, NTSC 4,43, NTSC
3,58 or AUTO.
button, you can set the VCR to ON or OFF.
Press or OK button to store the adjustments. "Pro-
gram Stored" will be displayed on the screen.
English - 25 -
select Colour System. By
button, you can change the colour
select VCR. By pressing
button, select Store Program.