Contents Accessories ............2 Sound Menu ............. 20 Features ..............2 Feature Menu ........... 21 Preparation ............. 2 Install Menu ............22 Safety Precautions ..........2 Source Menu ............ 23 Power Source ............. 3 PC Mode Menu System........23 Power Cord ............3 PC Position Menu ..........
Accessories Introduction Thank you for choosing this product. This manual will guide you for the proper operation of your TV. Before operating the TV, please read this manual thoroughly. SELECT Please do keep this manual in a safe place Batteries: 2 X AAA MENU INFO / for future references.
DON’T remove any ﬁ xed cover as this may expose Power Source dangerous voltages. The TV set should be operated only from a 220-240 DON’T obstruct the ventilation openings of the V AC, 50 Hz outlet. equipment with items such as newspapers, tablecloths, Power Cord curtains, etc.
Information for Users in European Cleaning Union Countries Before cleaning, unplug the TV set The above mark is in compliance with from the wall outlet. Do not use liquid or the Waste Electrical and Electronic aerosol cleaners. Use soft and dry cloth. E q u i p m e n t D i r e c t i v e 2 0 0 2 / 9 6 / Ventilation EC (WEEE).
Environmental Information • This television has been designed to be environmentally friendly by consuming less energy. You will not only help to save the environment but you can also save money by reducing electricity bills thanks to the energy efﬁ ciency feature of this TV. To reduce energy consumption, you should take the following steps: •...
Overview of the Remote Control Standby Cursor up / Page up (in TXT mode) Cursor right / Subpage (in TXT mode) Info / Reveal (in TXT mode) Numeric buttons Return / Exit (in DTV mode) / Index page (in TXT mode) SELECT Programme up / Page down (in DTV mode) Volume up...
LCD TV and Operating Buttons FRONT and REAR VIEW SIDE VIEW Control Buttons Standby button TV/AV button Programme Up/Down buttons Volume Up/Down buttons Note: Press “ ” /“ ” buttons at the same time to view main menu. Viewing the Connections- Back Connectors SCART socket inputs or outputs for external devices.
Viewing the Connections - Side Connectors CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Conditional Access” section. Component Video Inputs (YPbPr) are used for connecting component video.You can connect the component video and audio sockets with a device that has component output.
as illustrated below, switch to HDMI source. See, Connecting the LCD TV to a “Input Selection” section. • Most DVD players are connected through COMPONENT SOCKETS. Use a component For displaying your computer’s screen image on video cable to connect video input. To enable sound your LCD TV, you can connect your computer to the connection, use AUDIO IN located side of the TV TV set.
Using Side AV Connectors Inserting Batteries into the Remote Control Handset You can connect a range of optional equipment to your LCD TV. Possible connections are shown • Remove the battery cover located on the back of below. Note that cables shown in the illustration are the handset by gently pulling backwards from the not supplied.
• Functions of the menu system are described in the Input Selection following sections. Once you have connected external systems to your Volume Setting TV, you can switch to different input sources. • Press “ ” button to increase the volume. Press •...
Electronic Programme Guide (EPG) • Some, but not all, channels send information about the current and next events. Press EPG button to view the EPG menu. EPG appears on the screen. It is able to get Information of the channel - programs weekly by means of 7-DAY-EPG.
Digital Teletext (** for UK only) IDTV Menu System • Press the “ ” button. Press the “ M ENU” button. Main menu will be • The digital teletext information appears. displayed. • Operate it with the coloured buttons, cursor buttons and OK button.
Now pressing “ ” or “ ” button moves to the previous/ next character. Pressing “ ” or “ ” button toggles the current character, i.e., ‘b’ character becomes ‘a’ by “ ” and ‘c’ by “ ”. Pressing the numeric buttons ‘0...9’...
• F icon indicates that a channel is added to Favourite You can edit the list via GREEN key and delete with List. the RED button. Removing a Channel from Favourite List Conditional Access • Highlight the channel that you want to remove from •...
Conﬁ guration Receiver Upgrade You can conﬁ gure the settings of your TV. Select Over Air Download (OAD) Conﬁ guration from Setup menu and press “ OK ” to This feature helps to keep your TV updated. It works This feature helps to keep your TV updated. It works view this menu.
you change the pin number make sure you write it Relative Volume down and keep it safe. Using this option, the Audio Description volume level can be increased or decreased relatively, according to the general volume. Standby Search (optional) (*) (*) This setting is visible only when the Country option Time Settings (optional) is set to Denmark, Sweden, Norway or Finland.
Current Automatic Channel Scan • Audio : if audio language is supported change the Automatic channel scan is started by pressing audio language by pressing “ ” or “ ” buttons “OK” button while Automatic channel scan item is highlighted. •...
Manual Channel Scan Press the “OK” button to start installation. After search is completed for digital channels, a message asking In manual channel scan, the number of the multiplex is whether to search for analogue channels appears entered manually and only that multiplex is searched on the screen.This process is same as described in for the channels.
Game Mode Select Game Mode by pressing “ ” or “ ” button. Use “ ” or “ ” button to set Game Mode as On or Off . When Game Mode is set to On, speciﬁ c game mode settings, which are optimized for better video quality, will be loaded.
Store By pressing “ ” or “ ” button, select Blue Background . Press “ ” or “ ” button to set Blue Press “ ” or “ ” button to select Store. Press “ ” Background as On or Off . or OK button to store the settings.
Note : Store For copying from a DVD or VCR device, you should choose Press “ ” or “ ” button to select Store. Press “ ” desired source from source menu and turn “On” to EXT Out or OK button to store the settings. “ Stored... ” will be from feature menu.
AV modes). By cursor action, programme selection is Source Menu done automatically. Press “ ” or “ ” button and select the sixth icon. Name Then press “ ” or “OK” button. Source menu appears on the screen: To change the name of a programme, select the programme and press the RED button.
into correct place automatically. This setting therefore To cancel mute, there are two alternatives; the ﬁ rst automatically optimizes the display. one is pressing the “ ” button and the second one is increasing the volume level. Select Autoposition item by using “ ” or “ ” buttons. Press “OK”...
Teletext Teletext system is available if your broadcaster supports Panoramic Teletext function buttons are listed below: This stretches the left and right sides of a normal “ ” Teletext / Mix / PAT Mode picture (4:3 aspect ratio) to ﬁ ll the screen, without Activates teletext mode when pressed once.
Tips Image Persistence Please note that ghosting may occur while displaying a persistent image. LCD TVs’ image persistence may disappear after a short time. Try turning off the TV for a while. To avoid this, do not leave the screen in still picture for extended periods.
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1600 X 1200 . The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Speciﬁ cations TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Proﬁ le 1 Object carousel support compliant with ISO/IEC 135818-6 and UK DTT proﬁ le for UK Frequency range: 474-850 MHz for UK models 170-862 MHz for EU models...
DVB-T functionality information This DVB receiver is only suitable for use in the country which it was designed to be used in. Although this DVB receiver conforms to the latest DVB speciﬁ cations at the time of manufacture, we cannot guarantee compatibility with future DVB transmissions due to changes that may be implemented in broadcast signals and technologies.
Product Guarantee This product is guaranteed against manufacturing defects for a period of 1 Year This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of unauthorised modiﬁ cations or alterations, or has been the subject of commercial use In the event of a problem with the product within the guarantee period please return it to your nearest store If the item is shown to have had an inherent defect present at the time of sale, the store will provide you...