Connecting To A Dvd Player - Hitachi L19HP03U A Instructions For Use Manual

Connecting to a DVD Player

If you want to connect a DVD player to your LCD TV, you can use connectors on the TV set. DVD
players may have different connectors. Please refer to your DVD player's instruction book for
additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD
player as illustrated below, switch to HDMI source. See, "Input Selection" section.
• COMPONENT SOCKETS:
audio, use a component audio cable as illustrated below. When the connection is made, switch
to YPbPr source. See, "Input selection" section.
• You may also connected through COMPONENT sockets. Use a component video cable to connect
video input. For enabling audio, use a component audio cable as illustrated below. When done,
switch to YPbPr source. See, "Input selection" section.
Note : These three methods of connection perform the same function but in different levels of quality. It is not
necessary to connect by all three methods.
Use a component video cable to connect video input. For enabling
REAR VIEW
English - 14 -