Connecting To A Dvd Player - Hitachi L42VC04U I Instructions For Use Manual

42" lcd colour television
Hide thumbs Also See for L42VC04U I:
Table of Contents

Advertisement

Connecting to a DVD Player

If you want to connect a DVD player to your LCD TV, you can use connectors on the TV set. DVD
players may have different connectors. Please refer to your DVD player's instruction book for
additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD
player as illustrated below, switch to HDMI source. See, "Input Selection" section.
• Most DVD players are connected through SCART sockets. Use a scart cable to connect as
shown below.
• You may also connected through COMPONENT sockets. Use a component video cable to connect
video input. For enabling audio, use a component audio cable as illustrated below. When done,
switch to YPbPr source. See, "Input selection" section.
Note : These three methods of connection perform the same function but in different levels of quality. It is not
necessary to connect by all three methods.
REAR VIEW
English - 14 -

Advertisement

Table of Contents
loading

Table of Contents