Spdif Out; Effect; Store; Feature Menu - Hitachi 42LDF30UA Instructions For Use Manual

Spdif Out

Press " " or " " button to select Spdif Out .
Press " " or " " button to set the Spdif Out .
as On or Off .
Note: If Spdif Out is set to On, headphone will be
disabled.

Effect

If you are watching a mono broadcast, set Effect
on to obtain a better sound effect which will be
more stereo-like. If the current sound system is
stereo, switching this effect on will give a more
spatial effect.
Press " " or " " button to select Effect. Press
" " or " " button to set as On or Off.

Store

Press " " or " " button to select Store. Press "
" or OK button to store the settings. " Stored... "
will be displayed on the screen.

Feature Menu

Pip-Pap

In the Feature menu, highlight PIP item by
pressing " " or " " buttons. Press " " button
to enter PIP submenu:
Using " " or " " button, you can switch to PIP,
PAP mode or turn off the feature.
If the TV is switched to PIP or PAP mode,
Pip-Pap submenu will change accordingly and
the following settings will appear on the same
menu screen.
Note that if you switch to PAP mode by using Pip-Pap
setting, only Source and Swap options will be active
among the menu settings.
Pip-Pap
This line controls Pip/Pap modes. Use " " or " "
buttons to switch the TV to Pip , Pap or Off .

Pip Size

Using this setting, you can set the size of the
Pip window. Press " " or " " button to highlight
Pip Size item. Use " " or " " button to set Pip
Size to Small or Large.
Note: This setting will be inactive if the TV is set to
Pap mode.

PIP Position

This setting is used for moving the sub
picture.
Select PIP Position item by using " " or
" " button. Use " " or " " button to adjust PIP
position.
Positions available are: Bottom Right,Bottom
Left, Top Left and Top Right.

Source

PIP Source setting enables you to select the
source of the sub picture.
Select PIP Source item by using " " or "
" button. Use " " or " " button to set PIP
source.

Program

This setting will be unavailable to be used.

Swap

Select Swap item by using " " or " " button.
Use " " or " " button to set. This function
enables to swap between the main and the
PIP picture.
Note : See Appendix E for all PIP/PAP modes.

Sleep Timer

Press " " or " " button to select Sleep Timer .
Use " " or " " button to set the Sleep Timer.
The timer can be programmed between Off and
120 minutes in steps of 10 minutes.
English - 32 -