Balance; Headphone; Volume; Store - Hitachi L26HP03U Instructions For Use Manual

Press " " or " " button to change the preset.
In equalizer menu, the preset can be changed
to Music, Movie, Speech, Flat, Classic and
User.
Select the desired frequency by pressing "
" or " " button and increase or decrease the
frequency gain by pressing " " or " " button.
Press the " M" button to return to the previous
menu.
Note: Equalizer menu settings can be changed only
when the Equalizer Mode is in User.

Balance

This setting is used for emphasizing left or right
speaker balance.
Press " " or " " button to select Balance.
Press " " or " " button to change the level of
the balance. Balance level can be adjusted
between -32 and + 32.

Headphone

Press " " or " " button to select Headphone.
Press " " button to view the headphone
menu.
Headphone sub-menu options are described
below:

Volume

Press " " or " " button to select Volume. Press
" " button to increase headphone volume
level. Press " " button to decrease headphone
volume level. Headphone volume level can be
adjusted between 0 and 63 .

Store

Press " " or " " button to select Store. Press "
" or OK button to store the settings. " Stored..."
will be displayed on the screen.

Sound Mode

Press " " or " " button to select Sound Mode .
Using " " or " " button, you can select Mono,
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.

AVL

Automatic Volume Limiting (AVL) function
adjusts the sound to obtain fi xed output level
between programmes (For instance, volume
level of advertisements tend to be louder than
programmes).
Press " " or " " button to select AVL. Press " "
or " " button to set the AVL as On or Off.

Spdif Out

Press " " or " " button to select Spdif Out.
Press " " or " " button to set the Spdif Out.
as On or Off.
Note: If Spdif Out is set to On, headphone will be
disabled.
Store
Press " " or " " button to select Store. Press "
" or OK button to store the settings. " Stored..."
will be displayed on the screen.

Feature Menu

Pip-Pap

In the Feature menu, highlight PIP item by
pressing " " or " " buttons. Press " " button
to enter PIP submenu:
Using " " or " " button, you can switch to PIP,
PAP mode or turn off the feature.
If the TV is switched to PIP or PAP mode,
Pip-Pap submenu will change accordingly and
English - 35 -