Page 1
INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUAL INSTRCUTIUNI РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ UPUTE ZA UPORABU UPUTSTVO ZA UPOTREBU PRIRUČNIK FLAT DIGITAL TV DIGITALER FLACHBILDFERNSEHER TELEVIZOR DIGITAL CU ECRAN PLAT LCD / LED ТЕЛЕВИЗОР FLAT DIGITALNI TV PRIJAMNIK FLAT DIGITALNI TV ZARAVAN DIGITALNI TELEVISOR...
Page 2
Quick Start Guide Insert the batteries into the Remote Control Insert two AAA/R3 or equivalent type batteries inside. Observe the correct polarity (+/-) when inserting batteries and replace the battery cover. REAR SIDE OF THE TV Satellite Connect the antenna to your TV * The back connection options may differ depending on the model Aerial Cable...
Page 3
HDMI input PLEASE ENSURE BOTH UNITS ARE SWITCHED OFF BEFORE CONNECTING. Use a HDMI to HDMI cable to connect the two units together. To select the HDMI input, press the Source button on the remote control. Each time it is To HDMI connection pressed the on-screen menu confirms your selection.
Page 4
Connect your TV to the Internet Connectivity feature allows you to connect your TV to the home network wired or wirelessly. You can use this networking system to connect to the Portal or to access photo, video and audio files that are stored on a Media server connected to the network and play/display them on the TV.
Contents Safety Information ..........2 Markings on the Product......... 3 Preparation ............. 3 Features ..............4 Specification ............5 Disposal information ..........5 Remote Control RC 4848 (depending on the model) ... 6 TV and Operating Buttons (depending on the model)..............
• Do not expose the TV to direct sunlight, Safety Information open flames or place it near intense heat sources such as electric heaters. CAUTION • Listening in excessive volumes from earphones and RISK OF ELECTRIC SHOCK headphones may cause hearing loss. DO NOT OPEN •...
Markings on the Product WARNING The following symbols are used on the product as a marker for restrictions and precautions and safety Never place a television set in an unstable instructions. Each explanation shall be considered location. A television set may fall, causing where the product bears related marking only.
Features Notification (depending on the model) • Remote controlled colour TV TRADEMARK ACKNOWLEDGMENT • Fully integrated digital terrestrial/cable/satellite TV Manufactured under license from Dolby Laboratories. (DVB-T-T2/C/S-S2) Dolby and the double-D symbol are trademarks of • Fransat Installation Option Dolby Laboratories. •...
Specification Disposal information Instructions for waste Disposal: PAL BG/DK/II’ TV Broadcasting Packaging and packaging aids are recyclable and SECAM BG/DK should principally be recycled. Packaging materials, VHF (BAND I/III) - UHF such as foil bag, must be kept away from children. Receiving Channels (BAND U) - HYPERBAND Batteries, including those which are heavy metal-free,...
Remote Control RC 4848 (depending on the model) 1. Standby: Switches On / Off the TV 2. TV: Displays channel list / Switches among broadcast types / Switches to TV Source 3. Volume +/- 4. Menu: Displays TV menu 5. OK: Confirms user selections, holds the page (in TXT mode), views channel list (DTV mode) 6.
Connections (depending on the model) Connector Type Cables Device NOTE: When connecting a device via the YPbPr or Side Scart Connection AV input, you must use the (back) connection cables to enable connection. For Side AV input you should use the supplied cable. See Connection (back) the illustrations on the left side.
Power Connection TV and Operating Buttons (depending on the model) After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Power Cable Connection: IMPORTANT: The TV set is designed to operate on Standby/On 220-240V AC, 50 Hz socket.
-or- Environmental Information • Press and hold the middle of the control switch on This television is designed to be environment friendly. the left side of the TV until the TV comes on from To reduce energy consumption, you can follow these standby.
continue. Select an available satellite on the next Using SatcoDX Feature (depending on the model) screen and press OK to scan for services. You can perform SatcoDX operations using the • Single Satellite Cable: If you have multiple Installation>Satelite Settings menu. In the SatcoDX receivers and a single satellite cable system, select menu, there are two options regarding to the SatcoDx.
Timeshift Recording Recording a Programme IMPORTANT: When using a new USB hard disk drive, Press Pause button while watching a broadcast to it is recommended that you first format the disk using activate timeshifting mode. In timeshifting mode, the your TV’s “Format Disk” option. programme is paused and simultaneously recorded to the connected USB disk.
select the HDMI input of the connected CEC device Watching Recorded Programmes from the Source List menu. When new CEC source Select Recordings from the Media Browser menu. device is connected, it will be listed in source menu Select a recorded item from the list (if previously with its own name instead of the connected HDMI recorded).
Child Lock: When Child Lock is set, the TV can only General TV Operation be controlled by the remote control. In this case the Using the Channel List control panel buttons will not work. The TV sorts all stored stations in the Channel List. Internet Lock: If this option is set to OFF, the open You can edit this channel list, set favourites or set browser application in the portal will be disabled.
Prev. Time Slice (Red button): Displays the events It is not possible to set timer or record timer for two of previous time slice. or more individual events at the same time interval. Next/Prev Day (Programme +/- buttons): Displays Software Upgrade the events of previous or next day.
• Sound may be coming from only one speaker. Check Wireless connection the balance settings from sound menu. IMPORTANT: If your TV does not have built-in wifi feature, “Veezy 200” USB dongle is required to use Remote control - no operation wireless network features.
Page 20
Configuring Network Settings Please prepare your PC with the Nero Media Home programme. Your TV’s network settings include wired and wireless 2. Connect to a Wired or Wireless Network connection options. If you are connecting the TV via ethernet input, select Network Type as Wired Device. See the Wired/Wireless connection chapters for Select Wireless Device option if you are going to detailed configuration information.
Page 21
is successfully established. If the connection fails Wireless Display (depending on the model) try it again. Wireless Display is a standard for streaming video and Image transfer and audio streaming sound content by Wi-Fi Alliance. This feature provides You can also use this type of connection to transfer the ability to use your TV as wireless display device.
Page 22
Internet Portal Smart Center (depending on the model) Portal feature adds your TV a feature that allows you Smart Center is a mobile application running on iOS to connect to a server on the Internet and view the and Android platforms. With your tablet or phone, content provided by this server over your Internet you can easily stream your favourite live shows and connection.
AV and HDMI Signal Compatibility PC Input Typical Display Modes The following table is an illustration of some of the Source Supported Signals Available typical video display modes. Your TV may not support all resolutions. SECAM Index Resolution Frequency NTSC4.43 640x350 85Hz (SCART)
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not supplied), you can refer to the following resolution information. 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz 640x400 þ 640x480 þ þ þ...
The content and services available through the SmarTVue portal are provided by third-party providers and may be altered, suspended or discontinued at any time without notice. Hitachi is not responsible for any of the content or services and does not warrant the availability of or access to such content or services.