Parental Control; Maturity Lock; Menu Lock; Set Pin - Hitachi 42LDF30UA Instructions For Use Manual

• Press "M" button and using the " " or " "
buttons to choose Setup and press the OK
button.
• Highlight Confi guration menu with " " or " "
keys and press OK .
• Use " " or " " buttons to choose "RECEIVER
UPGRADE" and press OK button.
• Using the" " or " " button change "Automatic
scanning" from Enabled to Disabled.
• Highlight "Scan for upgrade" menu with "
" or " " keys and pres OK to commence
upgrade.
• After the search progress is completed, the
message " Completed searching for upgrade.
No new software was found" appears on the
screen if no new software is found.
• Do not forget to re enable the automatic OAD
function after you have made your recording
by repeating the above instructions but this
time selecting ENABLE.
Note: Your TV may start in First Time Installation
mode after OAD update.

Parental Control

Use " " or " " buttons to go to Parental Lock
option. Press "OK" button to enter the menu.
A dialog box asking for the lock key will be
displayed. The key is set to "0000" initially. Enter
PIN. If it is incorrect, "Wrong Pin" OSD will be
displayed. If it is correct, the Parental Control
menu will be displayed:

Maturity Lock

When set, this option gets the maturity information
from the broadcast and if this maturity level is
disabled, does not show video-audio.

Menu Lock

In menu lock you can set locking for all menus,
or the Installation Menu to restrict access to
these menus. If the menu lock is disabled, there
will be free access to the menu system. Use " "
or " " buttons to go to Menu Lock option. Use "
" or " " buttons to choose Menu Lock Mode.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only
with the correct lock key. So the user cannot
add, delete, rename, channels, cannot set
timers.
INSTALLATION MENU: Installation menu is
locked.So the user can't add channels. Changes
will be updated after exiting 'Configuration
Menu'.

Set PIN

Use " " or " " buttons to go to "Set PIN" option.
Press OK to display the "Set PIN" window. Use
numeric buttons to enter new pin number you
will need to input your new pin a second time
for verifi cation purposes. If both pin numbers
are four digits long and the same, the pin will
be changed. The factory default pin number is
0000, if you change the pin number make sure
you write it down and keep it safe.

Time Settings

In the configuration menu, highlight the Time
Settings item by pressing " " or " " buttons.
Press OK and Time Settings sub menu will be
displayed on the screen. Current Time,Time
Zone Setting and Time Zone will be available.
Use " " or " " buttons to highlight the Time
Zone
Setting. Time Zone Setting is set using " " or "
" buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Current Time and
Time
English - 26 -