"F" Group: Main Profile Parameters; "A" Group: Standard Functions - Hitachi SJ200 Series Quick Reference Manual

Parameter tables for user-settable functions follow these conventions:
• Some parameters have 2nd motor equivalents, indicated by the x2xx
parameter codes in the left-most column.
• Some parameters specify an option code. Where applicable, the
options codes will be in a bulleted list in the Name/Description
column.
• The default values apply to all models unless otherwise noted for each
parameter... –FEF (Europe) / – FU (USA)
• Some parameters cannot be edited during Run Mode, and certain
Software Lock settings (B031) can prohibit all edits. If in doubt, place
the inverter in Stop Mode or consult the inverter manual for details.

"F" Group: Main Profile Parameters

Func.
Code
F001 Output frequency setting
F002 Acceleration (1) time setting
F202 Acceleration (1) time setting, 2nd motor
F003 Deceleration (1) time setting
F203 Deceleration (1) time setting, 2nd motor
F004 Keypad Run key routing
• 00 Forward

"A" Group: Standard Functions

Func.
Code
A001 Frequency source setting
• 00 Keypad potentiometer
• 01 Control terminal
• 02 Function F001 setting
• 03 ModBus network input
• 10 Calculate function input
A002 Run command source setting
• 01 Input terminal FW or RV (assignable)
• 02 Run key on keypad, or digital operator
• 03 ModBus network input
Name / Description
• 01 Reverse
Name / Description
14
Default
Value Value
0.0
10.0
10.0
10.0
10.0
00
Default
Value
Value
–FEF / –FU
01 / 00
01 / 02
Set
Set