The Administration Tab - Management; The Administration Tab - Log; Figure 6-30: Administration Tab - Management; Figure 6-31: Administration Tab - Log - Linksys WRT54G User Manual

Wireless-G Broadband Router

The Administration Tab - Management

This section of the Administration tab allows the network's administrator to manage specific Router functions for
access and security.
Local Router Access. You can change the Router's password from here. Enter a new Router password and then
type it again in the Re-enter to confirm field to confirm.
Remote Router Access. To access the Router remotely, from outside the network, verify that Enable is selected.
Then, enter the port number that will be open to outside access. You will need to enter the Router's password
when accessing the Router this way, as usual.

Figure 6-30: Administration Tab - Management

UPnP. When using UPnP features, select Enable. As allowing this may present a risk to security, this feature is
disabled by default.
Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.

The Administration Tab - Log

The Router can keep logs of all traffic for your Internet connection. To disable the Log function, keep the default
setting, Disable. To monitor traffic between the network and the Internet, select Enable. When you wish to view
the logs, click Incoming Log or Outgoing Log, depending on which you wish to view.
Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.

Figure 6-31: Administration Tab - Log

Chapter 6: Configuring the Wireless-G Broadband Router 32
The Administration Tab - Management