Table of Contents
Advertisement
Wireless-G Broadband Router with 2 Phone Ports
The Administration Tab - Management
When you click the Administration tab, you will see the Management screen. This screen allows you to change
the Router's access settings as well as configure the UPnP (Universal Plug and Play) features.
Router Password
Local Router Access
To ensure the Router's security, you will be asked for your password when you access the Router's Web-based
Utility. The default password is admin.
Router Password. It is recommended that you change the default password to one of your choice.
Re-enter to confirm. Re-enter the Router's new Password to confirm it.
Remote Administration. This feature allows you to manage the Router from a remote location, via the Internet.
To enable Remote Administration, click the Enabled radio button.
Administration Port. Enter the port number you will use to remotely access the Router.
NOTE: When you are in a remote location and wish to manage the Router, enter http://<Internet IP
Address>: port. Enter the Router's specific Internet IP address in place of <Internet IP Address>, and
enter the Administration Port number in place of the word port.
UPnP
UPnP. UPnP allows Windows XP to automatically configure the Router for various Internet applications, such as
gaming and videoconferencing. If you want to use the UPnP feature, click the Enabled radio button.
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes. Help information is shown on the right-hand side of a
screen. For additional information, click More.
Chapter 5: Configuring the Router
The Administration Tab - Management
Figure 5-30: Administration Tab - Management
35
Advertisement
Table of Contents
