The Administration Tab - Factory Defaults; The Administration Tab - Firmware Upgrade; The Administration Tab - Config Management; Figure 8-45: Administration Tab - Factory Defaults - Linksys WRT54G3G-ST User Manual

Wireless-G Router for Mobile Broadband

The Administration Tab - Factory Defaults

Factory Defaults
Restore Factory Defaults. Click the Yes button to reset all configuration settings to their default values, and then
click the Save Settings button. Any settings you have saved will be lost when the default settings are restored.
This feature is disabled by default. Click the Cancel Changes button to cancel your change.

Figure 8-45: Administration Tab - Factory Defaults

The Administration Tab - Firmware Upgrade

Upgrade Firmware
To upgrade the Router's firmware, first download the firmware from the Linksys website. Then extract the file on
your computer. Do not upgrade your firmware unless you are experiencing problems with the Router.
Please select a file to upgrade. Click the Browse button to find the extracted firmware file. Then click the
Upgrade button. For more information about upgrading firmware, refer to "Appendix C: Upgrading Firmware".

Figure 8-46: Administration Tab - Firmware Upgrade

The Administration Tab - Config Management

This screen is used to back up or restore the Router's configuration file.
Backup Configuration
To back up the Router's configuration file, click the Backup button. Then follow the on-screen instructions.
Router Configuration
To restore the Router's configuration file, click the Browse button to locate the file, and follow the on-screen
instructions. After you have selected the file, click the Restore button.

Figure 8-47: Administration Tab - Config Management

Chapter 8: Configuring the Wireless-G Router for Mobile Broadband 80
The Administration Tab - Factory Defaults