Linksys WRT54G Configuration Note
  1. Manuals
  2. Brands
  3. Linksys Manuals
  4. Network Router
  5. WRT54G - Wireless-G Broadband Router...
  6. Configuration note

Linksys WRT54G Configuration Note

Hide thumbs Also See for WRT54G:
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

Linksys Wireless G WRT54G
Version 1.0
Scope
This document describes how to configure the Linksys Wireless G WRT54G router to work with
LucidLink Wireless Security Software, version 1.7. The document:
• Focuses on the manual configuration of the router.
• Does not address LucidLink software installation or configuration.
• Assumes the LucidLink server is installed and configured with an IP address and shared
secret.
Requirements
This document will work with routers that meet the following requirements:
Product Model Number
Firmware Version
NICs
The exact configuration of the router depends on the combination of router, wireless adapter
card, and client operating system used. For a list of compatible and supported hardware
combinations, go to:
2004 Interlink Networks, Inc. All rights reserved.
Phone: 734-821-1250 Web:
Linksys WRT54G Router.doc 11/8/2004 2:11 PM
Router Configuration Note
WRT54G
V2.02.2
D-Link AirPlus DWL-G650 Wireless Cardbus Adapter (rev C)
Intel(R) PRO/Wireless LAN 2100 3A Mini PCI Adapter
Dell Wireless WLAN 1350 Mini-PCI Card
www.lucidlink.com/Tech_Support/Compatibility.asp
www.lucidlink.com/Tech_Support/
Email:
support@lucidlink.com
Page 1 of 9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WRT54G and is the answer not in the manual?

Questions and answers

Related Manuals for Linksys WRT54G

Summary of Contents for Linksys WRT54G

  • Page 1 Linksys Wireless G WRT54G Version 1.0 Scope This document describes how to configure the Linksys Wireless G WRT54G router to work with LucidLink Wireless Security Software, version 1.7. The document: • Focuses on the manual configuration of the router. • Does not address LucidLink software installation or configuration.

  • Page 2: Connecting To The Router

    3 Open an Internet browser and in the address field enter the default IP address 192.168.1.1. 4 At the login box, enter User Name and Password. Linksys factory defaults are blank for User Name and admin for Password. Interlink Networks, Inc.
  • Page 3 Linksys Wireless G WRT54G 5 Click OK The Setup Basic Setup screen is displayed: Interlink Networks, Inc. Page 3 of 9 Linksys WRT54G Router.doc 11/8/2004 2:11 PM...

  • Page 4: Configuring The Router

    Choose the appropriate Time Zone for the router. o Select Daylight Saving settings if appropriate. Leave defaults for rest of page. 5 Click Save Settings. 6 Click Continue Interlink Networks, Inc. Page 4 of 9 Linksys WRT54G Router.doc 11/8/2004 2:11 PM...
  • Page 5 3 In Wireless Network Name (SSID) enter the SSID for this router. 4 In Wireless Channel leave default. 5 In Wireless SSID Broadcast select Enable. 6 Click Save Settings. 7 Click Continue. Interlink Networks, Inc. Page 5 of 9 Linksys WRT54G Router.doc 11/8/2004 2:11 PM...
  • Page 6 1 Click Wireless Security from the navigation bar on the Wireless tab. The Wireless Security screen is displayed. 2 For Security Mode, select WPA-RADIUS from dropdown list. 3 Click Save Settings. Interlink Networks, Inc. Page 6 of 9 Linksys WRT54G Router.doc 11/8/2004 2:11 PM...
  • Page 7 Secret is auto-generated when you install the server. You can copy this value from the Management Console Settings dialog to the router's interface page. o Left Key Renewal Timeout– leave default. 6 Click Save Settings. 7 Click Continue. Interlink Networks, Inc. Page 7 of 9 Linksys WRT54G Router.doc 11/8/2004 2:11 PM...

  • Page 8: Change Administrator Password

    1 Click the Administration tab. The Administration Management screen is displayed. 2 Enter the new Local Router Password and re-enter it to confirm it. 3 Click Save Settings. 4 Click Continue. Interlink Networks, Inc. Page 8 of 9 Linksys WRT54G Router.doc 11/8/2004 2:11 PM...

  • Page 9: Installing Router

    You should once again see the Home screen. 2 You may optionally bookmark this URL or create a shortcut to it from your desktop for future access to the Linksys Wireless G WRT54G configuration screens. Installing Router Connect the router to the same network hub or switch as the LucidLink server computer, if it is not already there.

Table of Contents