Format Selection Address Explanation - Fire-Lite 411UDAC Installation, Programming, Troubleshooting And Operating Instruction Manual

Central Station Communications

Format Selection Address Explanation

TABLE 4-2:
Where:
SSS or SSSS
FA
FA2
Z
RFA
RFA2
TZ
TZ2
RTZ
RTZ2
TS
TS2
RTS
RTS2
P
P2
RP
RP2
V
V2
RV
RV2
X
X2
Y
UD
UD2
Note that for Expanded Reporting, the digital communicator automatically adds the digit corresponding to the
Channel/Input number, and the second digit corresponding to any system trouble condition. Only the first digit
shown in Table 3-3 and Table 3-6 is programmable.
= Subscriber ID
= Fire Alarm (1st digit)
= Fire Alarm (2nd digit)
= Channel/Input Number
= Fire Alarm Restore (1st digit)
= Fire Alarm Restore (2nd digit)
= Zone Trouble (1st digit)
= Zone Trouble (2nd digit)
= Zone Trouble Restore (1st digit)
= Zone Trouble Restore (2nd digit)
= System Trouble (1st digit)
= System Trouble (2nd digit)
= System Trouble Restore (1st digit)
= System Trouble Restore (2nd digit)
= AC Loss (1st digit)
= AC Loss (2nd digit)
= AC Loss Restore (1st digit)
= AC Loss Restore (2nd digit)
= Fire Supervisory Condition (1st digit)
= Fire Supervisory Condition (2nd digit)
= Fire Supervisory Condition Restore (1st digit)
= Fire Supervisory Condition Restore (2nd digit)
= Test Report (1st digit)
= Test Report (2nd digit)
= Trouble corresponding to the following:
1 = Not Used
2 = Not Used
3 = Not Used
4 = Telco Primary Line Fault
5 = Telco Secondary Line Fault
6 = Not Used
7 = Not Used
8 = Not Used
9 = Not Used
A = Communication Failure Primary Number
B = Communication Failure Secondary Number
C = Not Used
D = Not Used
E = Not Used
F = System Off Normal
= Upload/Download (1st digit)
= Upload/Download (2nd digit)
411UDAC Document #51073 Rev. D 12/09/2008 P/N 51073:D
57