Streamtv™ Internet - Mitsubishi Electric 3D DLP 742 Series Owner's Manual

StreamTV™ Internet
About StreamTV
Internet services let you access many popular on-line
applications providing both free and paid content.
This section describes using VUDU Movies and VUDU
Apps. For additional Stream TV features, see the sup-
plemental Owner's Guide at www.mitsubishi-tv.com.
Required for StreamTV Internet media:
• Broadband Internet service (at least 2 Mbps for SD,
4 Mbps for HD, and 8 Mbps for 1080p HDX)
• Category-5 Ethernet cable or a wireless router
transmitting to an AzureWave AW-NU231 USB wire-
less adapter.
• Computer access to the websites of content provid-
ers when initial account activation is required for
service.
• A credit card to cover the cost of paid content.
Remote PC
• You can display the PC screen on the TV via a
home LAN network to use e-mail, social network
services (SNS), and other online services on the TV.
Home Network Setup
Before using StreamTV Internet media, you must
connect the TV to the Internet using either an Ethernet
cable or a wireless connection as described here.
Note: Make sure the TV is on any input other than
Bluetooth ® . Press the INPUT key to change.
Wired Ethernet Connection
DHCP (automatic)
1.
Connect the TV to your network router with a Cat-
egory-5 Ethernet cable (not supplied).
CENTER
HDMI
2
1 3 4
TV Panel
Router or modem
Incoming
providing high-speed
internet
internet service
cable
AUDIO/SURROUND
R -OUTPUT- L
DIGITAL
AUDIO
OUTPUT
SUB WOOFER
L
INPUT OUTPUT
LAN
3D
ANT
GLASSES
USB-P LAN LAN EMITTER
R
Ethernet
cable
1. Additional TV Features
2.
Open the Setup > Network menu to review set-
tings.
Setup > Network, DHCP connection
3.
Press EXIT
to clear the menu.
4.
Press the INTERNET key on the remote control to
begin using this feature.
Manual
Note: Manual setup is available only for a wired con-
nection.
1.
Connect the TV to your network router with a Cat-
egory-5 Ethernet cable (not supplied).
2.
In the Setup > Network menu, highlight Manual
and press ENTER .
3.
to move to the Connection Data area.
Press
4.
Input the connection data.
5.
After entering connection data, press ENTER to
connect.
6.
Change any of the following if needed:
• Default Gateway
• DNS
• Subnet Mask
For assistance call 1(800) 332-2119
17