Mitsubishi Electric 3D DLP 742 Series Owner's Manual page 20

20
1. Additional TV Features
StreamTV™ Internet, continued
Note: Each time you use the VNCviewer, you need to
select the IP address in the VNC log in menu
and type the password using the keyboard and
mouse.
Mitsubishi recommends using the password to
protect your privacy.
1.
When you log in successfully, the VNC PC screen is
displayed on the entire TV screen. If the log-in fails,
the VNC log in menu reappears.
The screen changes as follows:
Log-in
failure
Note:
• When the VNC PC (server) is turned off, the
VNCviewer cannot be used.
• The maximum supported resolution is
1980x1080.
• The resolutions of SVGA, XGA, SXGA, UXGA,
720p, and 1080p are supported.
• If the resolution of the desktop screen of the
VNC PC is more than 1080p, error message is
displayed.
• To select the picture format from full, PIP, and
scaling, press the FORMAT key on the remote
controller of the TV.
Full screen
For assistance call 1(800) 332-2119
Successful
log-in
PIP
FORMAT
key
FORMAT key
Scaling
FORMAT
key