Computer Video Adjustments - Mitsubishi Electric 3D DLP 742 Series Owner's Manual

Computer Video Adjustments

1.
Power on the computer.
2.
Select PC from the Input Selection menu. To do
this, press INPUT to open the Input Selection menu,
move the highlight to the PC icon, and press ENTER.
3.
Working from the computer, change the resolution
of the computer image. View the computer image
on the TV and maximize the computer
resolution while maintaining a suitable
aspect ratio for the image.
4.
Press FORMAT repeatedly to find the
picture shape best suited to the
image. See the chart on this page
showing how different computer reso-
lutions can be displayed on the TV.
5.
Perform TV video adjustments. Press
VIDEO repeatedly to access video-
adjustment options.
Distortion in Computer Images
Computer images may show distortion
when viewed on the TV, e.g., lines that
should be straight may appear slightly
curved.
Image Resolution
Your Mitsubishi TV can display the resolu-
tions shown in the chart from standard
VGA (640 x 480) through 1920 x 1080
signals at a refresh rate of 60 Hz.
In most cases, the computer will select the
best resolution match to display on the TV.
You can override this setting if you wish.
Refer to your computer operating system's
instructions for information on changing
the screen resolution.
You may need to restart the computer for
changes to take effect.
1. Additional TV Features
Tip
Set the computer's screen saver to display a pattern
after several minutes of inactivity. This acts as a
reminder that the TV is powered on.
Computer Display Formats
Press FORMAT repeatedly to cycle through the TV displays available for
your computer's video signal.
Computer Signal
Original Format
VGA
640 X 480
SVGA
800 X 600
Original Format
XGA
1024 X 768
PC 720p
1280 X 720
WXGA
1360 X 768
SXGA
1280 X 1024
Original Format
PC 1080p
1920 X 1080
For assistance call 1(800) 332-2119
As Displayed on TV Screen
4 X 3 16 X 9
Standard Standard
Standard Zoom
Standard Reduce
13
Zoom