Tv Features; Streamtv™ Internet - Mitsubishi Electric DLP 740 Series Basic Owner's Manual

TV Features

3
StreamTV™ Internet
About StreamTV
740 and 840 Series, U.S. only
Internet services let you access many popular on-line
applications providing both free and paid content.
Required for StreamTV internet media:
• Broadband internet service (at least 2 Mbps for SD,
4 Mbps for HD, and 8 Mbps for 1080p HDX)
• Category-5 Ethernet cable or a wireless router
transmitting to an AzureWave AW-NU231 USB wire-
less adapter.
• Computer access to the websites of content provid-
ers when initial account activation is required for
service.
• A credit card to cover the cost of paid content.
WD-82CB1 (Canada)
StreamTV internet services are unavailable in Canada.
Canadian users can, however, receive software updates
and use the iPhone remote control app noted on page
6 . Follow the instructions on these pages to connect
the TV to your home internet network.
Home N etwork Setup
Before using StreamTV internet media, you must
connect the TV to the internet using either an Ethernet
cable or a wireless connection as described here.
Note: 840 Series. Make sure the TV is on any input
other than Bluetooth ® . Press the INPUT key to
change.
Wired Ethernet Connection
DHCP (automatic)
1.
Connect the TV to your network router with a Cat-
egory-5 Ethernet cable (not supplied).
EXTERNAL EXTERNAL
CONTROLLER CONTROLLER
INPUT INPUT
CENTER CENTER
TV Panel
Router or modem
Incoming
providing high-speed
internet
internet service
cable
OUTPUT OUTPUT
SUB WOOFER SUB WOOFER
L L
INPUT INPUT OUTPUT OUTPUT
LAN
3D 3D
ANT ANT
GLASSES GLASSES
USB-P USB-P LAN LAN LAN
EMITTER EMITTER
R R R
Ethernet
cable
2.
Open the Setup > Network menu to review set-
tings.
Setup > Network, DHCP connection
3.
Press EXIT
to clear the menu.
Manual
Note: Manual setup is available only for a wired con-
nection.
1.
Connect the TV to your network router with a Cat-
egory-5 Ethernet cable (not supplied).
2.
In the Setup > Network menu, highlight Manual
and press ENTER .
3.
Press to move to the Connection Data area.
4.
Input the connection data.
5.
After entering connection data, press ENTER to
connect.
6.
Change any of the following if needed:
• Default Gateway
• DNS
• Subnet Mask
For assistance call 1(800) 332-2119
17