Units; Set Date & Time Format; Advanced Settings; Tmc Settings - Mio MIOMAP digiwalker C320 Manual

6.4.3 Units

You can set the distance units to be used by the program. MioMap may not support
all of the listed units in some voice guidance languages. If you select a measurement
unit that is not supported by the chosen voice guidance language, you will see a red
warning message under the selector.
6.4.4 Set Date & Time Format
You can set the date and time format displayed by MioMap. Various international
formats are available.

6.5 Advanced settings

These screens let you set a large number of different advanced settings and initiate
some special functions. These settings and functions are divided into groups.
Tap on any button to set the corresponding parameters. All but the last one will open
new windows where you can make your desired changes.

6.5.1 TMC settings

This button opens the TMC Control Center otherwise opened from the List of TMC
messages (Page 58) using the Settings button. TMC settings are described here:
Page 58.

6.5.2 Backlight settings

Here you can set how the display backlight behaves when using MioMap.
82